Q Acoustics 2010i Speakers

Each model boasts the same excellent, low distortion, ferro-fluid cooled, tweeter. It features a ‘High Frequency De-coupler to avoid cabinet resonance and its advanced, 25mm, multilayered dome is ventilated both on the surround and on the dome itself. This reduces distortion by helping the tweeter maintain mechanical integrity by restricting the temperature range it must endure

Laser spectrometry has been used to identify and then minimise cabinet resonances by the careful use of multi-thickness panels, internal bracing and damping materials. The particularly sweet high frequency response, obvious in all models, has been improved by the introduction of double layered top panels to every cabinet

The cone material of the new bass/midrange drivers is a carbon fibre/ceramic coated paper which was found, after extensive testing, to be the optimum material. Its near perfect balance of stiffness and damping delivers ultra low distortion in parallel with an outstanding transient response and astonishing dynamics

To reduce colouration, all 2000i Series cabinets are rear ported. ‘Port bungs’ are provided, to optimise bass response when the speakers are positioned very close to a wall

The appearance of the Q2000i Series makes a striking design statement. As well as traditional ‘Graphite Black’ and ‘Walnut’ finishes, at a small extra cost, the 2000 models are available in beautiful ‘Piano Gloss Black’ and ‘Piano Gloss White’ finishes

· Enclosure type: 2-way reflex

· Bass Unit: 100mm

· Treble Unit: 25mm

· Frequency Response: 68Hz - 22kHz

· Nominal Impedance: 6ohm

· Minimum Impedance: 4ohm

· Sensitivity: 86dB

· Recommended Power: 15 - 75w

· Crossover Frequency: 2.8kHz

· Dimensions H/D/W mm: 234.5 x 203 x 150

· Weight: 3.5kg