Monitor Audio Bronze W10 Subwoofer

£649.00
Bronze W10
+

Monitor Audio Bronze W10 Active Subwoofer

The sophisticated Bronze W10 subwoofer features an array of advanced technology including Class D amplification with high current Switch mode power supply, powerful DSP processing and a new 10" dished long-throw C-CAM driver design.

Advanced switch-mode power conversion techniques, custom DSP tuning and a massive power reservoir combine to generate enormous dynamic headroom from the Class D power-pack, allowing the driver to drop low and punch hard without distortion for a truly sensational deep bass experience.

Monitor Audio’s engineers have acoustically improved the driver and bass radiator by reducing the moving masses and tuning the compliances in the system to improve the transient response - kick drums and explosions now have much more punch and precision. Reduced moving mass and improved rubber feet allows more energy to be transmitted directly into the room rather than being lost through mechanical vibrations through the floor and walls.

 

  • Ultra long throw 10” driver featuring concave ‘dished’ C-CAM cone
  • 10” flat panel ABR (auxiliary bass driver) mounted on the bottom to augment low frequency extension and power handling
  • Powerful Class-D Amplifier delivering 220W with low distortion
  • Switch Mode power supply, designed to deliver high continuous rating and provides the instantaneous delivery of high current when required
  • DSP processing with all control features and crossover performed in the digital domain
  • Three pre-set EQ mode settings (Music, Movie, Impact)
  • 12 volt trigger - provides switching control from AV amp, processor or home automation control system
  • 18mm thick MDF construction
  • Heavy cabinet bracing applied to provide stiff, low resonance cabinet
  • Choice of 4 finishes

Monitor Audio Bronze W10 Subwoofer

Amplifier Output

220W R.M.S

Amplifier Classification

Class D with high current switch mode PSU

Drive Unit Complement

1 x 10" C-CAM® Long throw subwoofer driver + 1 x 10” flat panel ABR

Phase Control

0 degrees & 180 degree pure invert

Auto sensing power on

Line level >3mV, auto standby after 20 minutes

Equalisation DSP

3 pre-set modes. music, movies, impact

Audio Inputs/Outputs

LFE unbalanced input RCA, stereo unbalanced inputs RCA

12v Trigger

3.5mm mono mini-jack, 6v threshold

External Dimensions: (H x W x D)

366.5 x 321 x 364 mm

Input Impedance

20kΩ

Standby power consumption

Maximum 300w, <0.5W (ErP approved) in standby

Mains Input Voltage

110-120Vac - 50-60Hz
220-240Vac - 50-60Hz
Manually selected

Weight

13.4kg

No posts found

Write a review

Related Products

SUB 1
£20.00
Moniteur SUB 1 Subwoofer Cable Ideal for connecting your active subwoofer to your AV Receiver, amplifier etc Slim and flexible construction...
In stock

Greyhound
£49.00
Audioquest Greyhound Subwoofer Interconnect Solid 0.5% Silver Conductors Solid conductors eliminate strand-interaction distortion and reduce...