Monitor Audio SB-3 LCR Speaker

Add to wish list Add to comparison list

Monitor Audio SB-3 One Box LCR Speaker System

The SB-3 from Monitor Audio has been designed to offer the convenience of a typical soundbar – easy installation, less clutter and discrete appearance whilst still giving customers the performance and flexibility of a complete AV system.

The SB-3 is custom-built for screen sizes above 60" and features three separate driver arrays for front left, centre and front right channels, all in a single stylish cabinet. The important centre channel section includes twin C-CAM bass drivers, twin ABRs (Auxiliary Bass Radiators) and a single C-CAM tweeter to help provide the SB-3 with higher acoustic output and power handling. The left and right sections each employ individual mid-bass, tweeter and sealed ABR drivers.

Braced for maximum rigidity and further strengthened by Monitor Audio’s innovative bolt-through driver mountings, the SB-3’s high-density cabinet is finished with an acoustically transparent cloth and capped at either end with stylish brushed aluminium finials for a beautifully discreet designer look that will complement the style of any flat screen display.

High quality, low profile terminals are recessed to facilitate flush-to-wall installation (when using the optional low profile wall mount bracket) allowing for easy cable access, pre-alignment and fixing. Integrated Silicon feet provide a secure, stable base should you want to sit the SB-3 on top of a cabinet or shelf.

It is also very easy to upgrade the SB-3 to a full 5.1 home theatre system simply by adding an active subwoofer and a pair of rear speakers – choose from on-wall, in-ceiling or floorstanding models to complement your decor.

* Please note that the Monitor Audio SB-3 is a passive speaker so requires a separate surround sound AV receiver to power it. (please click here to browse our range of AV receivers)

To find out more or to hear the SB-2 in action please visit our Weybridge showroom.

Monitor Audio SB-3 LCR Speaker System

Frequency Response (-3dB)

80Hz – 30kHz

Sensitivity (1W@1M)

Left & Right Channels 84dB

Centre Channel 87dB

Nominal Impedance

8 Ohms

Power Handling Single (RMS)

Left & Right Channels: 40w

Centre Channel: 80w

System Power Handling (RMS)

100W (High pass filter set to 100Hz

Recommended Amp Requirements

30 - 100W

Recommended High Pass Crossover Frequency

80 - 120Hz

Maximum SPL (dBA)

104 (108.8 all channels driven)

Bass Alignment

Left & Right Channels 2 x Auxiliary Bass Reflex (ABR) Loading

Centre Channel 2 x Auxiliary Bass Reflex (ABR) Loading

Drive Unit Complement

Left & Right Channels: 2 x 4” (100mm) C-CAM cone bass/mid driver, 2 x 1” (25mm) C-CAM gold dome tweeter.

Centre Channel: 2 x 4” (100mm) C-CAM cone bass/mid driver, 1 x 1” (25mm) C-CAM gold dome tweeter.

Cabinet Dimensions (H x W x D)

145 x 1310 x 89mm

External Dimensions Inc Bracket (H x W x D)

145 x 1310 x 100mm



No posts found

Write a review
Please fill in the fields below for a price match request and we’ll get back to you asap: