Cart is empty
Naim Nait 50 An iconic, limited-edition amplifier
To celebrate Naim's 50th anniversary (1973 - 2023) and all these years of shared passion for sound, Naim have reissued their first ever, iconic integrated amplifier: NAIT 1. Made in England, NAIT 50 is presented in a limited-edition of 1973 pieces.
Back to the future
NAIT 50 gives more than a nod to the legendary NAIT 1, Naim’s integrated amplifier released in 1983. Naim engineers have been sure to preserve the DNA of NAIT 1, whilst making technical improvements to the circuits thanks to their unique expertise. Some of the new features on this anniversary edition include: a 1/4” (6.35mm) jack headphone output, so you can enjoy all types of listening. Behind its sleek design, NAIT 50 also delivers top notch sound quality.
The ultimate listening experience
Fully regulated 25W of power per channel, three input selections (MM phono, Stream, Aux), a discrete transistor MM phono stage: NAIT 50 combines power, performance and versatility. It reproduces the most exacting dynamics with all the confidence and authority we have come to expect from a Naim amplifier. It can be linked with all loudspeaker types, as well as a streamer, for the ultimate hi-fi system.
Built for the music
Naim products are designed to be both contemporary and timeless. Naim creations forgo any unnecessary adornments that detract from performance and sound quality. Handcrafted in the Naim workshops, NAIT 50 benefits from uncompromising design quality and presents a meticulous aesthetic. The front panel combines tradition and modernity, following the design codes of NAIT 1.
Naim Nait 50 Specifications
|
Audio inputs |
1 x RCA pair (47kΩ), in MM phono level 5mV, 2 x 5-pin DIN (stereo, 47kΩ), line level |
|
MM Phono Input |
47kΩ and 100pF |
|
Line Level Inputs |
130mV sensitivity, 47k input impedance, suitable for 2V |
|
Damping factor into 8 |
36 |
|
Input signal for clipping |
Line:88mV Phono: 710mV |
|
Crosstalk |
Line: 85dB, (at 1kHz, 25Watts 8Ω), Phono: 80dB |
|
THD + N |
0.015% |
|
Headphone output |
1.5Watts 16Ω |
|
Signal-to-Noise Ratio |
Ref. 1Watt 8Ω, A-weighted : Line: 80dB, 1V input / Phono: 78dB, 5mV input Ref. 25Watt 8Ω, A-weighted: Line: 93dB, 1V input / Phono: 84dB, 5mV input |
|
Power outputs |
25Watts 8Ω @0,1% THD+N 40Watts 4Ω @0,1% THD+N 60Watts 2Ω @1% THD+N |
|
Frequency Response |
Line: -3dB @ 4Hz to 45kHz Phono: -3dB @ 6Hz to 30kHz |
|
Gain |
Phono: +40dB (@1kHz RIAA) Pre-amplication (and headphone): +16dB Power Amplifier: +29dB |
|
Weight |
4.5kg |
|
Dimensions |
(8.7x20.7x32.1cm) |
|
Power - mains supply |
115V or 230V, 50/60Hz |
|
Power consumption |
Typical use consumption: 20W Stand-by mode consumption: <0.5W |
No posts found
