Monitor Audio Silver W-12 Active Subwoofer
The Monitor Audio Silver Series subwoofer delivers seismic bass right down to 22 Hz using a powerful, long throw 12-inch driver. The Silver W-12’s over-specified driver assembly employs a hugely powerful magnet system and massive voice coil to deliver immense power from the compact sealed cabinet. A heavy-duty diecast basket not only holds the massive system rigidly together, but also assists thermal sinking to keep the driver cool.
For the Silver W-12 subwoofer Monitor Audio specified a 500-watt Class-D amplifier and power-supply module from highly-regarded amplifier specialist Hypex; this provides incredible headroom and utilises advanced switch-mode power conversion techniques. A powerful DSP has been employed to deliver the best performance and filter characteristics, while running the unique APC (Automatic Position Correction) system. The APC is a completely in-house development, designed to automatically correct for room modes. It uses a microphone and test tones to calculate detrimental room modes and correct frequency response, optimising it for the room and position. This is a simple and quick automated process that is a complete revelation to the installer and ensures the user can enjoy the subwoofer quality without positioning restrictions.
At the heart of the Silver W-12 lies a sophisticated 32-bit micro-controller, monitoring performance thousands of times per second, ensuring the system can deliver the best possible bass. It will never become over-driven or distorted, even at maximum power.
· Ultra long-throw 12-inch driver featuring ‘dished’ C-CAM cone
· Triple suspension for ultimate linearity ensuring control at high power and excursions
· Oversized black anodised 3-inch voice coil which provides high power-handling and low distortion
· Powerful 500 W RMS Class-D amplifier with switching power supply provides instantaneous delivery of high current when required
· DSP processing with all control features and crossover performed digitally
· Automatic Position Correction plus automatic room setup feature using microphone for simple system optimisation
· USB for firmware updates
· Three preset EQ mode settings (Music, Movie, Impact)
· 12 V trigger provides switching control from AV amp or processor
· Solid 25 mm-thick (1-inch) MDF cabinet construction
· Heavy radial cabinet bracing
· Top-mounted control panel and mic. input for easy access to main features
· Selected premium-quality wood veneers in high-gloss lacquer and Satin White finishes
Monitor Audio Silver W12 Subwoofer
- Ultra long throw 12” driver featuring concave ‘dished’ C-CAM® (Ceramic-Coated Aluminium/Magnesium) cone.
- Triple suspended driver for ultimate linearity, ensuring control at high power and long excursions.
- Oversized black anodized 3” driver voice coil provides high power handling and low distortion.
- Powerful 500 watt RMS Class-D amplifier ensures instantaneous high current delivery.
- DSP processing with driver optimisation and crossover performed digitally.
- Monitor Audio developed Automatic Position Correction® (APC) optimises response for room acoustics.
- USB input for firmware updates.
- Three pre-set EQ mode settings (Music, Movie, Impact).
- 12 volt trigger provides switching control from AV amp or processor.
- 25mm (1”) MDF construction.
- Heavy radial cabinet bracing.
- Top mounted control panel for easy access to main features.
- Selected real wood veneer or high gloss piano finishes.
Monitor Audio Silver W12 Subwoofer Specs
Low Frequency Response
20Hz (Typical IEC room)
Upper Frequency Limit
40 - 120Hz Variable
Low Pass Filter Alignment
Active 4th order 24dB/Octave
Amplifier Power Output
500W Continuous
Amplifier Classification
Class-D amplifier with Switch mode power supply (SMPSU)
Bass EQ Profiles
1: Movie, 2: Music, 3: Impact
Phase Control
0 & 81 degrees
Auto Sensing
Line Level >2mV
Input Level Requirements
Standby after 20 minutes if no signal sensed
Driver Compliment
1 x 12" C-CAM® sub-woofer driver featuring triple suspension and 3" long throw voice coil
12v Trigger Input
5 - 12v via 3.5mm mono mini-jack socket
Cabinet Dimensions: (H x W x D) (Excluding Grille & Amp)
340 x 340 x 380mm
Cabinet Dimensions: (H x W x D) (Including Grille, Amp & Feet)
370 x 340 x 410mm
Mains Input Voltage
220 - 240 Vac 50/60Hz (Electronically Auto selected)
Power Consumption
400 Watts / 0.5 Watts in Standby (ErP approved)
Individual Weight
20.1Kg
No posts found